LYSAGHT^®KLIP-LOK700 HI-STRENGTH^®

LYSAGHT ®KLIP-LOK700 HI-STRENGTH®
Visually, a bold rib makes a strong statement rising from the flat pans. Thermal expansion of long, straight runs are achievable, and with no exposed fasteners, the long, straight lines of KLIP-LOK 700 HI-STRENGTH® (KL-700HS) remain clean and smooth.

At the heart of our system is our fixing clip, which can be laid in place and fixed simpler and faster than ever before. This is because the KL-700HS clip is fixed with hex. head screws, which are easier to drive. The clip also gives roofers the ability to accommodate up to 100mm of insulation.

KL-700HS is available in rolled-on-site lengths. Our mobile on-site rollformer means extra long lengths of KL-700HS can be made on-site and looks fantastic and also eliminates expansion joints. Longitudinal fluting manufactured from the mobile rollformer. Its availability is subject to enquiry.

Lysaght klip-lok 700 hi-strength is truly a superior product which has earned FM Global approval. For more information on FM Global approval, refer to the brochure available

MASSES LYSAGHT ®KLIP-LOK700 HI-STRENGTH®

Material and Colour Availability

For local availability of KL-700HS in the base metal thicknesses or the large range of available finishes (from plain ZINCALUME® steel to COLORBO ND® pre-painted steel),contact your nearest Lysaght service centre. For the local availability of colours for KL-700HS please enquire at your nearest Lysaght service centre.

Colorbond® steel with Thermatech® technology

Thermatech ® solar reflectance technology is now included in the standard COLORBO ND® steel palette. COLORBO ND® steel with The rmatech ® technology reflects more of the sun’s heat, allowing both roofs and buildings stay cooler in summer. In moderate to hot climates, compared to roofing materials of similar colour with low solar reflectance,COLORBO ND® steel with The rmatech ® can reduce annual cooling and energy consumption by up to 20%.

Minimum roof pitch

Our unique anti-capillary side lap allows you to use kl 700hS on roof pitches from as low as 1 degree (1 in 50) for 0.48 and 0.60 bmt , and 2 degrees for 0.42 bmt .

Maximum roof lengths for drainage measured from ridge to gutter (m)

Penetrations will alter the flow of water on a roof. For assistance in design of roofs with penetrations, please seek advice from our information line.

Maximum Support Spacings (mm)